Basic Patterns of Moisture Absorption during the Hydrothermal Treatment of Fibrous and Dispersed Materials with the Periodic Heat and Moisture Supply

Fibre Chemistry - The paper presents an analysis of moisture absorption during the oscillated hydrothermal treatment of fibrous and dispersed materials, which is performed on the basis of kinetic...     

Competitiveness Assessment of Regenerated Uranium-Plutonium Remix Fuel in Thermal Reactors

Atomic Energy - An economic and mathematical model has been developed to determine the competitiveness of REMIX-A and -C uranium-plutonium fuel obtained by reprocessing spent fuel from thermal...     

Photocaged Hoechst Enables Subnuclear Visualization and Cell Selective Staining of DNA in vivo

Selective targeting of DNA by means of fluorescent labeling has become a mainstay in the life sciences. While genetic engineering serves as a powerful technique and allows the visualization of nucleic acid by using DNA-targeting fluorescent fusion proteins in a cell-type- and subcellular-specific manner, it relies on the introduction of foreign genes. On the other hand, DNA-binding small fluorescent molecules can be used without genetic engineering, but they are not spatially restricted. Herein, we report a photocaged version of the DNA dye Hoechst33342 (pcHoechst), which can be uncaged by using UV to blue light for the selective staining of chromosomal DNA in subnuclear regions of live cells. Expanding its application to a vertebrate model organism, we demonstrate uncaging in epithelial cells and short-term cell tracking in vivo in zebrafish. We envision pcHoechst as a valuable tool for targeting and interrogating DNA with precise spatiotemporal resolution in living cells and wild-type organisms.     

Dismantling of Active Drains in the Technological Enclosures of the MR Reactor

Atomic Energy - The results of the dismantling of the active drain system and the decontamination of technological enclosures of the loop installations of the MR reactor, which is being...     

Hot isostatic pressing of transparent Yb3+-doped Lu2O3 ceramics for laser applications

Yb³⁺-doped Lu₂O₃ nanoparticles produced by laser ablation were used to fabricate transparent ceramics by a combination of pressureless sintering in vacuum (PS) followed by a hot isostatic pressing (HIPing). The samples were subjected to various PS and HIPing conditions and the microstructure evolution and its correlation with the transmittance were investigated. Relative densities of over 97% were achieved after PS at the temperatures of 1250–1700 °C. Rapid grain growth occurred within PS and HIPing temperatures above 1500 °C leading to formation of intragranular porosity which is deleterious for optical quality. Higher transmittance (81.7% at λ = 1080 nm) and ultrafine microstructure with an average grain size of 0.35 μm were obtained by PS at 1250 °C followed by HIPing at 1400 °C for 5 h under 207 MPa. Output power of 2.02 W with a slope efficiency of 46.5% was obtained under a quasi-continuous wave end pumping at 929.4 nm.     

Nanocomposite powders of hydroxyapatite-graphene oxide for biological applications

The repair of bone fractures is a clinical challenge for patients with impaired healing, such as osteoporosis. Currently, different strategies have been developed to design new biomaterials, enhancing their interactions with biological systems and conducting the cellular behavior in the desired direction to help fracture healing. In the present work, hydroxyapatite-graphene oxide (HA-GO) nanocomposites were produced and the morphological and physicochemical influences of the addition of 0.5 wt%, 1.0 wt% and 1.5 wt% of GO to HA were observed. FEG-SEM and TEM analyses of HA-GO nanocomposites showed HA nanoparticles adhered to the surface of the GO sheets, suggesting an effective method to form nanostructured graphene-based biomaterials. As confirmation, physicochemical analyses by Raman, FTIR and TGA demonstrated a strong affinity between HA and GO, according to the increase of concentration from 0.5 wt% to 1.5 wt% GO in the HA-GO nanocomposites. Also, in order to evaluate the HA-GO nanocomposites behavior under biological microenvironment, in vitro bioactivity and indirect cytotoxicity tests were performed. FEG-SEM analyses confirmed the positive results for the bioactivity properties of HA-GO nanocomposite and indirect cytotoxicity demonstrated that even with a decrease in the hDPSCs viability and proliferation, when increasing to 1.5 wt% of GO concentration, high level of cell viability was exhibited by HA-GO nanocomposites. These biological results suggested the 0.5 wt% HA-GO nanocomposite as a potential bioactive bone graft and a promising biomaterial for bone tissue regeneration, when compared to the pure HA.     

Sampling of Volatiles in Closed Systems: A Controlled Comparison of Three Solventless Volatile Collection Methods

Journal of Chemical Ecology - Complex inter-organismal communication among plants, insects, and microbes in natural and agricultural ecological systems is typically governed by emitted and...     

Calculation and Experimental Determination of the Neutronics Characteristics of the IRT-T Research Reactor

Atomic Energy - The results of calculations and experimental determination of the neutronics characteristics of the IRT-T research reactor are presented. The IRT-T reactor is a pool reactor with...     

Sintering behaviour of fluorapatite–silicate composites produced from natural fluorapatite and quartz

In this work, the sintering behaviour of fluorapatite (FAp)–silicate composites prepared by mixing variable amounts of natural quartz (2.5 wt% to 20 wt%) and FAp was studied. The composites were pressureless sintered in air at temperatures from 1000 °C to 1350 °C. The effects of temperatures on the densification, phase formation, chemical bonding and Vickers hardness of the composites were evaluated. All the samples exhibited mixed phase, comprising FAp and francolite as the major constituents along with some minor phases of cristobalite, wollastonite, dicalcium silicate and/or whitlockite dependent on the quartz content and sintering temperature. The composite containing 2.5 wt% quartz exhibited the best sintering properties. The highest bulk density of 3 g/cm³ and a Vickers hardness of >4.2 GPa were obtained for the 2.5 wt% quartz–FAp composite when sintered at 1100 °C. The addition of quartz was found to alter the microstructure of the composites, where it exhibited a rod-like morphology when sintered at 1000 °C and a regular rounded grain structure when sintered at 1350 °C. A wetted grain surface was observed for composites containing high quartz content and was believed to be associated with a transient liquid phase sintering.     

Carbon-based TiO2-x heterostructure nanocomposites for enhanced photocatalytic degradation of dye molecules

Application of brown titanium dioxide (TiO_2-x) and its modified composite forms in the photocatalytic decomposition of organic pollutants in the environment is a promising way to provide solutions for environmental redemption. Herein, we report the synthesis of effective and stable TiO_2-x nanoparticles with g-C₃N₄, RGO, and multiwalled carbon nanotubes (CNTs) using a simple hydrothermal method. Among all the as-synthesized samples, excellent photocatalytic degradation activity was observed for RGO-TiO_2-x nanocomposite with high rate constants of 0.075 min^?1_, 0.083 min^?1 and 0.093 min^?1 for methylene blue, rhodamine-B, and rosebengal dyes under UV–Visible light irradiation, respectively. The altered bandgap (1.8 eV) and the large surface area of RGO-TiO_2-x nanocomposite impacts on both absorption of visible light and efficiency of photogenerated charge electron (e^?)/hole (h⁺) pair separation. This resulted in enhanced photocatalytic property of carbon-based TiO_2-x nanocomposites. A systematic study on the influence of different carbon nanostructures on the photocatalytic activity of brown TiO_2-x is carried out.